What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 01:16
This device then solves the entire problem.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The Best Tea for Lowering High Blood Pressure, Recommended by a Dietitian - EatingWell
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
nine
[image of Common-mode choke]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Which is the worst Bollywood movie you have ever seen and why?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
But… the neutral is now “floating” because of the 1 ohm resistance.
Aurora borealis lights up northern Nevada, Carson City skies - Carson Now
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I post the exact comment here.
He then describes the function of a fuse.
It also is a device that limits the change in current flow.
So, the voltage could go up to 500 volts, and the fuse will not open up.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Is Jp-shares.com a good website for crypto trading?
A circuit breaker is similar, but is resettable.
In schematic diagrams this is the symbol for a fuse:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Building the 'Moonhouse': Q&A with artist Mikael Genberg - Space
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
[old diagram got deleted by accident]
This one hit behind the barn.
Chevy’s C8 Corvette ZR1 Supercar Is Even Faster Than It Expected - Robb Report
First Sentence:
A fuse is a non-resetable over current circuit protector.
but this device (an Inductor) … impedes the rapid changes in the current.
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
The bolt then partially travels down the line to your home.
Have you ever been a victim of gaslighting? What happened?
He then asserts :
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–16 [ OO OLAOYE OYEBODE ]
The other is “what does a “fuse” do?”
Barnstars:
so, what happens?
Because the load is inductive, the current lags the voltage.(by a bit).
There are three different concepts here that are getting confused.
It seems Mohan does not understand the difference between a comment and an Answer.
what exactly is a ‘surge’ protector?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
Now when you have a certain ac resistance, then a current flows in a loop.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
An AC voltage/ current source, and an ac inductive load.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The third is lightning and “how it gets conducted into a home.”
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
These devices are installed between the “hot” and “neutral” and protective ground.
This is where the MOV conducts again, and dissipated the energy.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is the picture of an electronic coil of wire wound around a core of magnetic material.
a photo is worth a thousand words.
Here is a simplified AC power diagram.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What is lightning?
This is 'the assistant's answer'
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(Dc diagram shown, AC is similar).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But it can get overloaded, and no longer works.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
but I think this circuit , shows a few more pieces.
eight
Edit 2024–10.
For this case there are devices called Metal oxide varistors (MOV).
At one ohm, the resistor has a maximum of 1 watt power.